Parameters 

 Project 
 Specification 

 Independent table belt line 15 m 
 L15M * W1.18M * H1.9M 

 Drive system 
 1,1 HP motor, gear box: 70 box-type teeth; 

 2, the speed :0-6 m / minute, 1HP love Deli Frequency Control 

 3, 6-inch active drum * 350 * 350 3-inch roller follower 

 Fuselage structure line 
 1, using 40mm * 40mm aluminum frame making, face height: 750 + /-20mm 

 2, line both sides of pulling the body through the production of aluminum components 40mm * 60mm 

 3, the lighthouse using 40mm * 40mm aluminum production, with lighting hood with 40W fluorescent single; light through material is 25 * 50 aluminum flat through the composition of the national standard fluorescent lamps with 2.5mm2 cable, on both sides of a single switch, two control points 

 4, the power system: power cord wires using 4mm2 GB, trunking with 40 * 80 galvanized iron trough; each station to install 220V outlet strip with three holes-bit, 1 for every 1 meter. 

 5, bar table dimensions: Width 300mm, tops, δ16mm board, surface mount 2mm thick green fire board, gray T-type plastic bag side 

 6, Green Dutch production δ2 * 350PVC anti-static transport belt, with belt loop connection; galvanized pallet supporting belt, cap installed between the galvanized drum φ25 * 360 

 7, billboards stent using 25mm * 15mm aluminum production, an A4 pouches per station. 

 8, 30 * 28 light shelves installed wind approved aluminum, wind approved rack. 

 9, H frame to install a keel and a 6 minutes 6 minutes trachea trachea trachea of each station with a fast connection Tsui. 

 10, dashboard: W 350mm, tops, δ16mm board, surface mount green fire board, semi-circular wooden packet